Types of scaffolding
To help develop this article, click 'Edit this article' above.
Contents |
[edit] Introduction
Scaffolding is typically formed from simple, repeating systems of tubes, joints and boards that provide a temporary safe working platform for activities such as; construction, maintenance, repair, access, inspection and so on.
There are two main types of scaffolding:
- Freestanding scaffolds, such as Independent towers,
- Independent tied scaffolds, such as frameworks tied to an adjacent structure.
More detailed descriptions of a range of scaffold types are set out below.
[edit] Putlog scaffold
Also known as a bricklayer’s scaffold, a putlog scaffold consists of an outer row of vertical members (standards) joined together by ledgers fixed with right-angle couplers. These support the transverse transoms (or putlogs) which are built into the brickwork bed joints as work proceeds. This type of scaffold is only suitable for new work in bricks or blocks.
For more information see Putlog holes
[edit] Independent tied scaffold
This consists of two rows of standards with each row being joined together with ledgers. The ledgers support the transverse transoms. The scaffold is erected independent from the building but is tied to it at suitable intervals. The inner row should be set as close as is practicable to the building. A base plate is provided for each row of standards.
[edit] Working platform
A working platform is a close-boarded or plated level surface from which work can be carried out. It must provide a safe working space of sufficient strength to support the loads of operatives and materials. All working platforms that are erected above ground level must be fitted with a toe board and guard rail.
[edit] Birdcage scaffold
This is a type of independent scaffold which is typically used for interior work in large buildings such as halls, churches, museums, and so on. It is generally only used for one level, typically to provide easy access to ceilings and soffits. It consists of parallel rows of standards connected by ledgers in both directions and supporting a single working platform.
[edit] Slung scaffold
This type of scaffold is suspended from the main structure in one position using wire ropes or steel chains. It is similar to birdcage scaffold but has the advantage of leaving a clear space beneath the platform. This makes it a suitable scaffold for buildings such as theatres, cinemas, spaces that are to remain operational, and so on.
[edit] Suspended scaffold
This type of scaffold consists of a working platform which is suspended from the top of a structure by cantilever beams or outriggers which are capable of raising and lowering the platform. In this way, access can be gained for light maintenance work, window washing, and so on. It is common for high-rise buildings to be fitted with a permanent cradle system at roof level for this purpose.
[edit] Cantilever scaffold
This is a type of independent scaffold which is erected on cantilever beams and secured to a building at only one end. The other side is left hanging or exposed. This type of scaffold is efficient in that it provides access to areas that would be difficult or uneconomic to reach using a scaffold system erected from ground level. Workers operating on cantilever scaffold systems must be fitted with safety harnesses.
[edit] Mobile scaffold
Also known as a mobile tower scaffold, this type of scaffold is assembled from pre-formed framing components and fitted with wheels which allow it to be rolled from one place to another. It is typically used on sites where multiple areas require access for light maintenance work, or where a traditional scaffold would have to cover too great a distance to be practical.
[edit] Related articles on Designing Buildings Wiki
- Debris netting.
- Hoists.
- How to remove scaffolding.
- How to use a ladder.
- Lifting device.
- Putlog holes.
- Rubble chute.
- Scaffold register.
- Scaffolding.
- Temporary works.
- Types of crane.
- Work at height.
- Work at height regulations.
- Working platform.
[edit] External references
Featured articles and news
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.
Licensing construction in the UK
As the latest report and proposal to licence builders reaches Parliament.
Building Safety Alliance golden thread guidance
Extensive excel checklist of information with guidance document freely accessible.
Fair Payment Code and other payment initiatives
For fair and late payments, need to work together to add value.
Pre-planning delivery programmes and delay penalties
Proposed for housebuilders in government reform: Speeding Up Build Out.
High street health: converting a building for healthcare uses
The benefits of health centres acting as new anchor sites in the high street.
The Remarkable Pinwill Sisters: from ‘lady woodcarvers’ to professionals. Book review.
Skills gap and investment returns on apprenticeships
ECA welcomes new reports from JTL Training and The Electrotechnical Skills Partnership.
Committee report criticises UK retrofit schemes
CIOB responds to UK’s Energy Security and Net Zero Committee report.
Design and construction industry podcasts
Professional development, practice, the pandemic, platforms and podcasts. Have we missed anything?
C20 Society; Buildings at Risk List 2025
10 more buildings published with updates on the past decade of buildings featured.
Boiler Upgrade Scheme and certifications consultation
Summary of government consultation, closing 11 June 2025.
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Comments